Ghost Immobiliser Installation
Protect your pride & joy from car thieves by putting in an immobiliser ghost. Our TASSA-certified system is safe from key cloning, hacking, and bypassing the vehicle immobiliser.
The system is hidden within your vehicles wiring loom so it's completely invisible to anyone looking. It operates by creating pin code push sequences that are activated by existing buttons on the steering wheel, door cards, and the centre console.
No circuit cuts
A car is a prized asset that you put in many years of effort to obtain, which is why car owners would want to secure their vehicle against theft. However, traditional security devices such as wheel locks and alarms can easily be snatched away or jumped by thieves. ghost immobiliser price are very effective and efficient solution that operates in silence and isn't easily identified by modern thieves.
A ghost immobiliser is a hidden device that connects to your vehicle's CAN data network to shut down the engine without the use of radio frequencies or key fobs. It communicates with your vehicle's ECU through existing buttons on the steering wheel, dash, and door panels to generate an unique pin code that only you are aware of. The code can be altered at any time and can have up to 20 numbers based on your preference. It also comes with an emergency code that you can use in the event of forgetting your PIN.
The ghost immobiliser can also be helpful to prevent the relay box inside your home from transmitting the signal from your car key, which will open the doors and begin your vehicle. It could even block high-tech methods of stealing your car such as OBD port hacking. The device is small and weatherproof, so it's hard to spot and even harder to tamper with.
The ghost immobiliser has another advantage: it can be fitted to your vehicle without leaving permanent marks. This makes it ideal for those who are planning to sell their vehicle in the near future. It's also a lot faster and easier to install than the factory-installed system.
The Autowatch Ghost, a cutting-edge new generation device, stops thefts from cars that are not connected to a vehicle's CAN network and using the buttons to generate an unique PIN code. It is a discreet device that is installed without cutting wires and does not require any additional key fobs. It is also connected to the original ECU of the vehicle, which prevents thieves from using a different key. This system is TASSA certified and can be linked to an International Security Register, allowing owners to have confidence that their vehicles are safe from theft.
No scanning with RF
You will want to protect your vehicle from theft if have spent lots of money and effort to customize it. One method to do this is to install an immobiliser, which will prevent the engine from starting until you enter a unique PIN code. By using the buttons on your steering wheel as well as the dashboard, you can create an up to 20 digits in length that is only known by you, and ensure that only you are able to drive your vehicle. It is also possible to set up a service and valet mode that will allow you to start your car temporarily without entering the PIN. This will allow your technician to work on your vehicle without you being there. This feature is great for people who want to save time and make their lives easier.
Ghost immobilisers are new generation device that connects to your vehicles CAN data network and uses the buttons on the dashboard and steering wheel to programme a personalised PIN code. It is designed to be discreet and has no indicators or sounds to give it away and can be installed anywhere on the vehicle without affecting the appearance of your pride and joy.
This stealthy device is approved by TASSA and can reduce the cost of insurance. It has a tracking function that can locate your vehicle even if it's stolen. This is a great feature for those who own a unique expensive vehicle that you've spent time and effort to customize.
The Autowatch Ghost can be used in conjunction with an iPhone application that allows you to start your car remotely in the event that you forget your PIN or are unable to get into the vehicle for some reason. This feature is perfect when you need to go on errands or pick up your kids, but do not want to risk having someone else drive your car. This feature is helpful when you need to take your vehicle in for repair or service.
The Ghost is unique in that it does not transmit or detect radio frequency and is therefore undetectable by thieves using RF scanning and code grabbing technology. It is also able to safeguard your car from key copying and ECU swapping as well as other the most common methods used to steal cars.
No key to cloning
Ghost immobilisers are a great option for protecting expensive vehicles and are designed to block key replication. They stop your car from starting until an additional PIN code is entered in conjunction with the standard key fob. This makes it extremely difficult for thieves to steal your vehicle and can also deter them from doing it in the first place. This is a great idea if you've spent lots of time and money making your vehicle unique or have a unique or expensive model.
The immobilisers are connected to the vehicle's CAN data network and are completely concealed, which means that their presence is not evident. It is also impossible for a burglar to identify the device using radio frequency scanning or code technology for grabbing. This means that a criminal will have to spend much longer in order to successfully get your vehicle.
A criminal will need to be aware of the unique pin sequence and the location of the ghost in order to avoid it. But, the pin code is specific to you and can be altered as many times as you'd like. The pin code is simple for you to remember but mathematically impossible for anyone else to understand. The engineer will also have provided an emergency pin code in the event that you forget the pin.
The Ghost CAN Bus immobiliser can be easily mounted anywhere on your vehicle. It is compatible with all vehicles and can be completely customizable to match your car's style. It is also very easy to use and affordable. You can even transfer the device to a different vehicle if you change vehicles in the course of ownership, as long as the new vehicle is compatible with it.
The CAN bus is compatible with other security features. It is able to, for instance detect damage to the vehicle and notify the owner. It could also shut down the engine if it senses that the car has been damaged. The system can also protect your vehicle from key cloning and hacking. It also detects vibrations and contact with the vehicle. It will also notify the owner when the vehicle is moved.
No OBD port hacking
Ghost is a hidden device that is connected to the CAN data network of your vehicle. This stops thieves from getting into your vehicle to disable the alarm, turn off your key fob and code new keys. This technology is an enormous improvement over the traditional methods that have been employed by thieves in the past to take your vehicle. The CAN data networks means that your system won't be affected when you disconnect or change your battery.
The Autowatch Ghost is the world's first aftermarket CAN bus non-detectable immobiliser that safeguards against key-cloning, hacking, and theft of replica cars. It does not utilize LED indicators or key-fobs. Instead, it uses the buttons on your steering wheel, console and door panels.
Modern thieves employ diagnostics to detect cuts in the circuit in your vehicle. They are able to bypass immobilisers that require a large amount of wiring or are built into the wiring. The Ghost is weatherproof, doesn't need any additional wiring, and can't be identified by diagnostic tools that are professional. It can be installed even on vehicles equipped with anti-theft systems.
Another major benefit of a Ghost immobiliser is that your vehicle is only able to be started by someone who knows the PIN code and has physical access to your car. This is a major advantage over security systems that can be bypassed by simple modification of cables or a screwdriver.
You can easily reset your PIN in case you forget it using the emergency PIN override feature of your mobile or computer. This is useful if you need to start your car after it's been left in a garage, or the valet parking service.
The Autowatch Ghost 2 is the latest generation of the product, and is insurance approved by TASSA when installed by one of our authorized installers. It has a QR fingerprint system for individual parts to be identified which will enable the return of stolen parts in the event of their being discovered. It can also be switched into 'service mode' that will allow the engine to start when the vehicle is in a garage, or using a valet parking service however, you will need to enter your PIN code to leave the vehicle.